Description
Core Ripper 5 Surfboard
SIZES: 5’4″ | 5’8″ | 5’11”
A TIMELESS CLASSIC FOR EVERY WAVE
Does the legendary Ripper 5 need an introduction? Probably not. Still made in the classic surfboard construction in combination with modern manufacturing technology, it is your loyal and durable companion who will reliably support you in a wide variety of conditions.
With its shortboard outline complemented by elements of a fish shape and the progressive rocker, the Ripper 5 is ideal for every wave kiter and any wave from small waves to steep overhead breakers.
SHAPE
HYBRID-SHAPE
The fusion of a shortboard and fish outline, featuring a generous center width and ample front-area volume, guarantees good gliding properties and extremely good tilt stability. The Mini Swallow Tail ensures the smoothest behavior in wide turns, and the possibility to push tight turns into the wave.
PROGRESSIVE ROCKER
The Ripper has a three-stage progressive rocker with a flat center section – ideal for bottom turns with maximum speed and perfect precision over the tail when the board is pushed into the corner.
MONO CONCAVE HULL
The underbody of the Ripper is adorned with a subtle Mono concave, which ensures strong gliding properties and maximum guidance in turns.
CONSTRUCTION
DESIGNED IN GERMANY.
HANDMADE IN SPAIN.
Developed in Fehmarn and produced by experienced shapers in Spain. The Green Room is handcrafted to guarantee one hundred percent dimensional precision and the specific glass board performance that passionate Green Room fans expect.
LIGHTWEIGHT AND ROBUST
Inside the sandwich construction is the EPS core, a lightweight, densely foamed material with high damping and deformation properties. This gives the board somewhat “softer” properties for a particularly dynamic ride. The shell made of the extremely strong T10 in the top deck, as well as a fiberglass-epoxy resin laminate make the board light and robust.
STRAP-READY
The V4A stainless steel inserts laminated into the deck provide the freedom to decide whether you want to ride your Green Room with or without straps. The wooden stringer has been removed from the board, now the inserts sit in two separate inserts, which has a weight-saving effect.
THRUSTER FIN SETUP
Thruster setups stand for greater agility and tighter turns compared to quad setups. In addition, they detach more easily from the water during radical maneuvers on the wave lip.
Thruster setups are the most widely used fin setup, stand for high agility and allow tight turns. They detach more easily from the water during radical maneuvers on the wave lip than quad setups.
THRUSTER FIN SETUP
Thruster setups stand for greater agility and tighter turns compared to quad setups. In addition, they detach more easily from the water during radical maneuvers on the wave lip.
Thruster setups are the most widely used fin setup, stand for high agility and allow tight turns. They detach more easily from the water during radical maneuvers on the wave lip than quad setups.
