Description
Core Green Room 3 Surfboard
SIZES: 5’6″ | 5’8″ | 5’10” | 6’0″
PRECISION PERFORMANCE IN BIG WAVES
The Green Room 3 is the performance surfboard of the CORE range, suitable for medium to large waves and experienced wave kiters who want to refine their precious down-the-line rides with high speed and maximum control. Due to the enormous gliding properties, the board takes the elevator back to the peak immediately afterwards.
The EPS composite sandwich has been given a new top deck made of the lighter T10 PET, which has excellent stiffness and strength and is therefore extremely robust against impacts.
NARROW OUTLINE DELIVERING MANY ADVANTAGES
Despite its small volume and narrow outline, the Green Room is extremely pleasant to ride. Super controlled by the long edge with extremely good gliding and vertical running properties. Yes, it’s narrow, but cuts through butter choppy water like a warm knife. At the same time, it allows bottom turns with enormous speed and delivers more than an impressive grip for radical maneuvers in big waves.
TUCKED UNDER RAILS
The tucked under rails in the middle section support the harmonious and dynamic riding experience of the Green Room.
PROGRESSIVE ROCKER
Like the Ripper, the Green Room has a three-stage progressive rocker with a flat middle section and high bending at the nose and tail to master even the steepest drop-ins.
MONO TO DOUBLE CONCAVE HULL
The bottom runs from the nose from a flat bottom into a deeper single concave, to a slight double concave that also tapers out of the tail. Ideal for tight, controlled turns in big waves.
CONSTRUCTION
DESIGNED IN GERMANY.
HANDMADE IN SPAIN.
Developed in Fehmarn and produced by experienced shapers in Spain. The Green Room is handcrafted to guarantee one hundred percent dimensional precision and the specific glass board performance that passionate Green Room fans expect.
LIGHTWEIGHT AND ROBUST
Inside the sandwich construction is the EPS core, a lightweight, densely foamed material with high damping and deformation properties. This gives the board somewhat “softer” properties for a particularly dynamic ride. The shell made of the extremely strong T10 in the top deck, as well as a fiberglass-epoxy resin laminate make the board light and robust.
STRAP-READY
The V4A stainless steel inserts laminated into the deck provide the freedom to decide whether you want to ride your Green Room with or without straps. The wooden stringer has been removed from the board, now the inserts sit in two separate inserts, which has a weight-saving effect.
THRUSTER FIN SETUP
Thruster setups stand for greater agility and tighter turns compared to quad setups. In addition, they detach more easily from the water during radical maneuvers on the wave lip.
Thruster setups are the most widely used fin setup, stand for high agility and allow tight turns. They detach more easily from the water during radical maneuvers on the wave lip than quad setups.
THRUSTER FIN SETUP
Thruster setups stand for greater agility and tighter turns compared to quad setups. In addition, they detach more easily from the water during radical maneuvers on the wave lip.
Thruster setups are the most widely used fin setup, stand for high agility and allow tight turns. They detach more easily from the water during radical maneuvers on the wave lip than quad setups.
